Part Number Hot Search : 
CT100 HDBS103G BU9794KV KSH200 1028DI BU9794KV PU3127 TFDU5103
Product Description
Full Text Search
 

To Download 2SC2411K Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 2SC2411K
Transistors
Medium Power Transistor (32V, 0.5A)
2SC2411K
Features 1) High ICMax. ICMax. = 0.5A 2) Low VCE(sat). Optimal for low voltage operation. 3) Complements the 2SA1036K. External dimensions (Units : mm)
2SC2411K
2.90.2 1.90.2 0.95 0.95 (1) (2)
1.6+0.2 -0.1 2.80.2
1.1+0.2 -0.1 0.80.1
0 0.1
Structure Epitaxial planar type NPN silicon transistor
(3) 0.4 +0.1 -0.05 +0.1 0.15 -0.06
0.3 ~ 0.6
All terminals have same dimensions
ROHM : SMT3 EIAJ : SC-59
(1) Emitter (2) Base (3) Collector
Abbreviated symbol : C
Denotes hFE
Absolute maximum ratings (Ta = 25C)
Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature
* PC must not be exceeded.
Symbol VCBO VCEO VEBO IC PC Tj Tstg
Limits 40 32 5 0.5 0.2 150 -55 to +150
Unit V V V A W C C
*
Rev.A
1/3
2SC2411K
Transistors
Electrical characteristics (Ta = 25C)
Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current DC current transfer ratio Collector-emitter saturation voltage Transition frequency Output capacitance Symbol BVCBO BVCEO BVEBO ICBO IEBO hFE VCE (sat) fT Cob Min. 40 32 5 - - 120 - - - Typ. - - - - - - - 250 6.5 Max. - - - 1 1 390 0.6 - - Unit V V V A A - V MHz pF IC = 100A IC = 1mA IE = 100A VCB = 20V VEB = 4V VCE = 3V, IC = 100mA IC/IB = 500mA/50mA VCE = 5V, IE = -20mA, f = 100MHz VCB = 10V, IE = 0A, f = 1MHz Conditions
Packaging Specifications and hFE
Package Code
Type 2SC2411K hFE QR
Taping
T146 3000
Basic ordering unit (pieces)
hFE values are classified as follows:
Item hFE Q 120 to 270 R 180 to 390
Electrical characteristic curves
1000
COLLECTOR CURRENT : IC (mA)
200 100 50 20 10 5 2 1 0.5 0.2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1
COLLECTOR CURRENT : IC (mA)
500
VCE=6V
100
COLLECTOR SATURATION VOLTAGE : VCE(sat) (V)
Ta=25C
0.50
mA
A 0.45m A 0.40m
0.35mA
0.30mA
0.25mA
1
Ta Ta=25C lC/lB=10
0.5
Ta=100C 80C 25C -25C -55C
0.2
50
0.20mA
0.15mA
0.10mA
0.1
0.05
0.05mA
0 0 1 2 3
IB=0A 4
5
0.02 0.5
1
2
5
10
20
50 100 200
500 1000
BASE TO EMITTER VOLTAGE : VBE (V)
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
COLLECTOR CURRENT : IC (mA)
Fig.1
Grounded emitter propagation characteristics
Fig.2
Grounded emitter output characteristics ( )
Fig.4 Collector-emitter saturation voltage vs. collector current
Rev.A
2/3
2SC2411K
Transistors
COLLECTOR SATURATION VOLTAGE : VCE(sat) (V)
1
1000
DC CURRENT GAIN : hFE
0.5
500
0.2
0.1
0.05
Ta=100C 75C 50C 100 25C 0C C 50 -25 C -50
200 20
TRANSITION FREQUENCY : fT (MHz)
Ta Ta=25C lC/lB=10
VCE=3V
500
Ta=25C VCE=5V
200
100
50
0.02 0.5
1
2
5
10
20
50 100 200
500 1000
10 0.1 0.2
0.5 1
2
5 10 20
50 100 200 5001000
-0.5
-1
-2
-5
-10
-20
-50
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
EMITTER CURRENT : IE (mA)
Fig.4 Collector-emitter saturation voltage vs. collector current
Fig.5 DC current gain vs. collector current
Fig. 6 Gain bandwidth product vs. emitter current
COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF)
50
Ta=25C f=1MHz IE=0A IC=0A
Cib
20
Co
10
b
5
2 0.5
1
2
5
10
20
50
COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V)
Fig.7
Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage
Rev.A
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1


▲Up To Search▲   

 
Price & Availability of 2SC2411K

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X